ÖNORM EN 1998-3|Assessment + retrofitting

The scope of EN 1998-3 is as follows:

  • to provide criteria for the evaluation of the seismic performance of existing individual building structures,
  • to describe the approach in selecting necessary corrective measures,
  • to set forth criteria for the design of retrofitting measures (i.e. conception, structural analysis including intervention measures, final dimensioning of structural parts and their connections to existing structural elements).

When designing a structural intervention to provide adequate resistance against seismic actions, structural verifications should also be made with respect to non-seismic load combinations.

Reflecting the basic requirements of EN 1998-1, this standard covers the seismic assessment and retrofitting of buildings made of the more commonly used structural materials: concrete, steel, and masonry.

Although the provisions of this standard are applicable to all categories of buildings, the seismic assessment and retrofitting of monuments and historical buildings often requires different types of provisions and approaches, depending on the nature of the monuments.

Since existing structures reflect the state of knowledge at the time of their construction, possibly contain hidden gross errors, or may have been submitted to previous earthquakes or other accidental actions with unknown effects, structural evaluation and possible structural intervention are typically subjected to a different degree of uncertainty (level of knowledge) than the design of new structures. Different sets of material and structural safety factors are therefore required, as well as different analysis procedures, depending on the completeness and reliability of the information available.

Current Document

ÖNORM EN 1998-3
EUROCODE 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings

Current status:

ÖNORM

Publication:

2005-11-01

Document superseded:

PRESTANDARD ÖNORM ENV 1998-1-4

Further Information & Order:

ÖNORM EN 1998-3

National Annex (German only)

ÖNORM B 1998-3
EUROCODE 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings - National specifications concerning ÖNORM EN 1998-3 and national comments

Current status:

ÖNORM

Publication

2009-02-01

National Specifications:

Overview

Further Information & Order:

ÖNORM B 1998-3